COMES COMPLETE WITH YOUR CHOICE OF NPK TOP PLATES TO COVER FROM 300 - 500 CLASS EXCAVATORS:

1)NPK Built Custom Top Plate To Fit 370-500 Class Excavators 16" Between Ears 100mm Pins

2)NPK Custom Top Plate To Fit 300-400 Class Excavators 15.20" Between Ears 90mm Pins

THIS IS A PERFECT CONDITION READY TO WORK HAMMER WITH A NEW VALUE AS SHOWN BELOW WITHOUT HOSES AND UNDERWATER KIT( SEE QUOTE IMAGE 3 RECEIVED JUNE 9, 2020).

NKP GH-15 Hammer Features: 1. Excellent power-to-weight ratio 2. Unique gas-charged piston maximizes hydraulic hammer efficiency 3. Simple, two-moving-parts design for reliability 4. Separate ports for the NPK Autolube (auto greasing) system and an airline for underwater use 5. Bottom tie rod nuts for easier serviceability (GH Models) 6. Quick-change tool system with single round retainer pin 7. Variety of tool configurations available 8. Replaceable cylinder sleeves for easy, economical rebuild 9. Anti-blank fire feature virtually eliminates dry firing for long hydraulic breaker life

GH15 Hammer $133,499 Moil Tool - 11065075 Included in spec Mounting kit L3072 (Volvo ECR305CL) Included in spec Hammer Mounted Auto Luber –G025 Included in spec Set of pins Included in spec Top Plate install Included in spec Total Sell Price: $133,499 Plus taxes

THIS LOW HOUR 2017 HAMMER HAS ORIGINAL PAINT AND ORIGINAL POINT AND ORIGINAL WIRE WRAPPER FACTORY HOSES

SERIAL NUMBER 118883

THESE HAMMERS ARE CHEAP TO SERVICE AND REBUILD SEE PICTURES 5 AND 6 WHICH SHOW THESE HAMMERS ARE CHEAP TO MAINTAIN COMPARED TO THE COMPETITION

AND ARE GROSSLY UNDERRATED BY NPK - THIS HITS AS HARD AS ANY 10000 FT LB HAMMER MAYBE HARDER ESPECIALLY COMPARED TO THE V SERIES CHEAP KOREAN HAMMERS THAT ARE THROW AWAY HAMMERS IN SHORT ORDER - CHEAP TO BUY BUT EXPENSIVE TO MAINTAIN.

BRANDT TRACTOR IS THE DEALER ACROSS CANADA AND PARTS ARE AVAILABLE NEXT BUSINESS DAY ANYWHERE IN CANADA - NOT WAIT WEEKS TO GET PARTS IF YOU CAN EVEN GET THEM??

TAKE IT FOR $50000.00 - INCLUDES NPK FACTORY BOXED NITROGEN CHARGING KIT

WILL SHIP IN NORTH AMERICA AT EXACT COST OR ON BUYERS ACCOUNT - WE GET GREAT RATES

FRANK 604-476-7777

SEE THE 40 PAGE FLIP BOOK OPERATORS MANUAL - COPY AND PASTE:

https://www.yumpu.com/en/document/read/11755594/hydraulic-hammer-operators-manual-npk-construction-equipment

Whether it be for the smallest, most nimble of carriers to the largest of excavators, NPK maintains its commitment to incorporate the latest technological innovations into our entire hydraulic hammer product line. Utilizing state of the art computer modeling, NPK has designed a lighter weight hammer that delivers high impact energy and improves carrier balance. Hammer mounted automatic lubrication systems are an optional add-on for models ranging from PH-3 to GH-23. This type of auto-lube is ideal for hammers being used by multiple machines. For dedicated hammer carriers and larger hammer models, NPK offers a carrier mounted auto-lube system.

NPK’s GH series hydraulic hammers feature our direct-acting gas-charged piston creating maximum impact per blow. Our long stroke piston design, coupled with our shock-absorbing rubber mounts, reduces recoil to the operator while increasing the life of the carrier. NPK’s ABF feature allows the hammer to fire only when pressure is applied to the tool, increasing component life. These rugged hammers are capable of high production rates in all forms of concrete as well as both medium and hard rock. The simplicity of our hammer design is not limited to the main components. The standard bracket style makes servicing your NPK hammer simple. While lying horizontally, the hammer body can be removed without having to remove the top bracket. The GH15 hydraulic hammer is compatible with backhoes and/or excavators in the 33-50 ton range.

GH SERIES FEATURES ● Excellent power-to-weight ratio ● Unique gas-charged piston maximizes hammer efficiency ● Simple, two-moving-parts design for reliability ● Anti-blank fire feature for long hammer life ● Ports for automatic bushing lubrication and air for underwater use ● Bottom tie rod nuts for easier serviceability ● Quick-change tool system with single round retainer pin ● Variety of tool configurations available ● Replaceable cylinder sleeves for easy, economical rebuild ● Upper and lower replaceable tool bushings

NPK HYDRAULIC HAMMER FEATURES ● Gas powered piston creates more impact per blow than any hammer in the industry ● Eliminates bladder type accumulators that are prone to sudden failure & costly maintenance ● Only two moving parts means increased productivity and reliability ● An Anti-blank firing (ABF) system prevents hammers from firing if the chisel is not loaded, minimizing wear. The result is safer, more efficient operations & longer hammer life. ● The round, rotating tool retaining pin contributes to longer life and easy tool replacement ● Replaceable cylinder sleeves prevent wear to the main body and are an easy economical solution when rebuilding ● Separate ports for bushing lubrication and air for underwater applications

FULL SERVICEABILITY OF THE INDUSTRY’S EASIEST, LOWEST COST, BODY-REBUILD SYSTEM Hammers aren’t meant to have an easy life and occasionally need to be rebuilt. An NPK hammer body can be re-sleeved for approximately 1/3rd of the cost of competing brands when the body becomes worn or damaged. A typical hammer body can cost as much as 70% of the cost of a new hammer so when you buy an NPK hammer you can expect an excellent return on your investment.

NPK DEDICATED MOUNTING KITS ENABLE HYDRAULIC BREAKERS TO BE MOUNTED AS (DETERMINED BY MODEL SIZE): ● Mini excavator attachments ● Skid steer attachments ● Backhoe attachments ● Wheel loader attachments ● Full-size excavator attachments

POTENTIAL APPLICATIONS INCLUDE: ● Rock breaking ● Slag breaking ● Reducing oversize material ● Concrete breaking and recycling ● Road construction ● Sidewalk and curb construction ● Commercial / selective demolition ● C&D recycling / sorting ● Underwater applications ● Site excavation ● Scaling and tunnel excavation ● Trenching ● And many more!

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications General Year 2017 Manufacturer NPK Model GH15 Condition Excellent Low Hour Unit

Specifications Impact Energy Class* - ft lbs 8,000 Impact Frequency - bpm 320-400 Recommended Carrier Weight - tons 33-50 Oil Flow - gpm (lpm) 53-66 (200-250) Operating Pressure - psi (bar) 2,600 (180) Working Weight - lb (kg) 7,300 (3,310) Tool Diameter - in (mm) 6.1 (156) Tool Working Length - in (mm) 27 (690) * “Impact Energy Class” is a marketing rating and does not relate to measured impact energy. Working weights include tool and mounting bracket. Weights may vary depending on bracket configurations. Specifications subject to change without notice.

THE CURRENT TOP PLATE FITS THE FOLLOWING MACHINES WITH A PIN GRABBER OR EASILY MODIFIED TO PIN ON.

SEE MY OTHER ADS AS CLEANING OUT OUR YARD OF ALL EXCESS EQUIPMENT

CATERPILLAR 325CL 330B 330BL 330CL 330CL ME330CLN 330D 330DL 336DL 336EL

KOMATSU PC300 PC300 LC-6P C300 LC-6LC PC300 LC-6 LEPC300LC-7 PC300 LC-7E0 PC300 LC-7L PC300 LC-8

WILL BUILD TOP PLATE TO FIT YOUR MACHINE WHETHER WEDGE CLAMP OR PIN ON FOR $4000.00